Strand7 Heat Transfer Benchmark > 기술자료실

본문 바로가기

기술지원

기술자료실

기술자료 Strand7 Strand7 Heat Transfer Benchmark

페이지 정보

profile_image
작성자 씨앤지소프텍
댓글 0건 조회 6,828회 작성일 21-01-11 15:03

본문

HEAT TRANSFER
 
BS EN ISO 10211-1 Test Case
Problem Definition
A three-dimensional heat transfer analysis of the models shown is carried out. Details of the geometry, material data and the applied convection conditions are provided within the standard: BS EN ISO 10211-1: Test Case 3. This standard states that:
  1. the difference between the temperatures calculated by the method being validated and the temperatures listed shall not exceed 0.1 K
  2. the difference between the heat flows calculated by the method being validated and the temperatures listed shall not exceed 2% of the listed values.
Solution Type: 3D Steady State Conduction and Convection
Elements: 3D Hex20 Brick Elements
Attributes: Ambient Temperatures and Convection Coefficients

 Mesh 1 DetailsMesh 2 Details
Element Type:Hex20Hex20
Number of Elements:824826980
Number of Nodes:37649119150

PointTemperature
Results (°C)
Target
Temperatures
(°C)
Difference (K)
 Mesh 1Mesh 2  
U12.912.912.9<0.1
V11.311.311.3<0.1
W16.416.416.4<0.1
X12.612.612.6<0.1
Y11.111.111.1<0.1
Z15.315.315.3<0.1

Point Temperature Target Values and Strand7 Results

 

Boundary
Surfaces
Heat Flow
Results (W)
Target Heat
Flow (W)
Percentage
Difference (%)
 Mesh 1 Mesh 2  Mesh 1 Mesh 2
a 45.71 (loss)45.59 (loss)46.3 (loss) 1.27 1.53
b 13.60 (loss) 13.78 (loss) 14.0 (loss) 2.86 1.57
g 58.90 (gain) 59.10 (gain) 60.3 (gain) 2.32 1.99

Boundary Surface Heat Flow Target Values and Strand7 Results


b45323f8d7618933de25396e014330f7_1612161709_1.gif
 

첨부파일

댓글목록

등록된 댓글이 없습니다.


그누보드5
  • 서울시 도봉구 도봉로106길 22, 201-508 (북한산현대홈시티) TEL : 02-529-0841 FAX : 02-529-0846
  • Copyright © CNG SOFTEK CO., LTD. All rights reserved.